The elemental analysis of noncondutive specimens requires cumbersome carbon coating.The SC-701C,recently developed by SANYU ELECTRON,however,allows carboncoating to be carried out by a simple switching operation just as with the sputterer. Besides,the SC-701C is designed for operational ease overall.
All you habe to do for coating is to put a specimen in the coating chamber and close its door.Then all operations from evacuation to coating are carried out under automatic control.An epochal carbon coatercIt is the name of the SC-701C.

• The time required from start-up to carbon coating is only 5 minutes or so.

• One setting of carbon in its cartridge allows repeating carbon coating tens of times.

• Specimen setting is simple.

• Coating is started only by pressing a button.

• To evcuate this coater,you have only the chamber door. Then,evacuation is automatically started (there is no need at all of valve operaion).

• The carbon holder is a cartridge type, making carbon setting extremely simple and eliminating the possibility of staining your hands.

• Special provisions are made for preventing thermal damage.

• Carbon vapor reaches even hard-to-reach portions of the specimen because of low vacuum.
  (There is no need of a specimen rotating and tilting device.)

• Option Magnetron Type Cool Coater

  
  

SC-701C Specifications

Carbon holder       Cartridge type
Number of coatings  One to nineteen
Coating time        0.3sec/1time
Carbon              5mm dia.Five pieces made by SANYU ELECTRON provided
Chamber size        160mm dia.x160mm in depth
Electrodes          One pair
Current             MAX. 70A, 12V
Input power         100V, 15A, 50Hz/60Hz
Evacuation system   Rotary pump. 100l/min
Vacuum degree       10-3 Torr
Size                400(W)~980(H)~580(D)mm
Weight              130kg