 |
View > Toolbar > Main Diagram |
This tool bar contains tool buttons which can control the main procedures of constructing a diagram. These are given below together with the corresponding menu items
- Read Data from File
Those files which were previously saved can be selected. When the multiple files are selected in the CHD options, the chd project file can be selected among several available files.
- ReOpen
From the most recent used files, the file to be open can be selected. When the multiple chd project files are used, the most recent file is always selected.
- MALT Direct
A new chd project will start with obtaining the compound system from the MALT system.
- Handling the current chemical system,
About the chemical system, CHD makes automatic default settings depending on whether the system contains the aqueous species or not. When special treatments will be needed, this option should be selected.
- specify the conditions to construct a diagram .
For the Pourbaix diagram, CHD prepares all defualt settings to be needed in constructing the Pourbaix diagram. For other systems like the high temperature chemical systems, it is needed to specify several conditions to construct diagrams.
- Run ,
When specifications needed to constrauct diagrams are determined withuot inconsistency, this toolbutton becomes active and available.
- Make Dissection ,
When the chemical potential diagram was constructed and is shown on the display panel, one dissection can be drawn on the target diagram and if needed, the additional diagram will be constructed depending on the chemical system and the adopted conditions and will be shown in the separate display panel. For this purpose, (5) One Dissection page will appear.
- Swing Disection ,
- Make many dissections.
- Range.
- Rotatiopn.
- Stop.
This is to stop the procedures of constructing diagrams. In many cases, such procedures do not take a time and the new feature will appear in the display panel. When no change will happen and the stop tool button keeps to be in red, clicking this bottun will stop the calculation procedures.